S&P Silent 100 CHZ Wall Fan - Humidity / Timer / Indicator / Shutte - Rated 26l/s

Product Part Number SILENT-100-CHZ Product Overview The S&P SILENT-100 CHZ is a quiet-running 100mm axial extract fan designed to remove humid, stale air from bathrooms, toilets, en-suites and other small domestic spaces. It is suitable for wall or ceiling mounting and connects to standard 100mm circular ducting. An integrated electronic humidistat automatically activates the fan when the relative humidity rises above the selected level. The humidity setting can be adjusted between 60% and 90% RH, helping the fan respond automatically to moisture generated through showering, bathing and other everyday activities. The adjustable run-on timer allows the fan to continue operating after the humidity has fallen below the selected level or after the connected switch has been turned off. This helps remove remaining moisture and odours from the room. The motor is mounted on specially designed silent elastic blocks that absorb vibration and reduce the transmission of noise into the surrounding wall or ceiling. The fan also includes an operation indicator and automatic back-draught shutter, which helps prevent outside air from entering when the fan is switched off. Technical Specification Manufacturer: Soler & Palau Product Range: SILENT Fan Type: Low-noise axial extract fan Application: Bathrooms, toilets, en-suites and other small domestic spaces Installation: Suitable for wall or ceiling mounting Duct Connection: 100mm diameter Maximum Airflow: 95m³/h Maximum Airflow: Approximately 26.4l/s Listed Rated Airflow: 26l/s Fan Speed: 2,400rpm Maximum Power Consumption: 8W Supply Voltage: 230V Frequency: 50Hz Sound Pressure Level: 26.5dB(A) at 3 metres under free-air conditions Humidity Sensor: Adjustable electronic humidistat Humidity Adjustment Range: 60–90% RH Run-On Timer: Yes Timer Adjustment Range: Approximately 2–20 minutes Operation Indicator: Pilot light Back-Draught Shutter: Automatic back-draught shutter PIR Movement Sensor: No Motor Bearings: Long-life ball bearings Motor Mounting: Vibration-absorbing silent elastic blocks Motor Protection: Thermal overload protection Electrical Insulation: Class II IP Rating: IP45 Maximum Air Temperature: 40°C Housing Material: Injection-moulded plastic Colour: White Front Dimensions: 158mm × 158mm Overall Depth: 109.3mm Rear Casing Depth: Approximately 84.6mm Installation Depth: 79mm Spigot Diameter: 98.9mm Weight: Approximately 0.57kg