SABr Saw Replacement Blade

Product Overview A direct replacement blade for the SABR Limb Saw. Sharp, durable, and ready to get you back to cutting clean shooting lanes. SABr Saw Replacement Blade Directions: Step 1 Remove the front limb lock using a 1/8” hex wrench on both limb lock bolts. Take note of the washer placement during removal. Set bolts, washers, and limb lock aside. Step 2 Remove the blade bolt and nut using a large flathead screwdriver. Take out the old blade and insert the new blade between the metal blade brace. Secure using the included blade bolt and nut. Torque the blade bolt to 15 in-lbs to ensure proper blade tension. Adjust slightly if needed for a smooth, properly tensioned blade. Step 3 Reinstall the limb lock using the original bolts and washers. Install the black nylon washers between the limb lock and the handle. Install the wave washers between the limb lock bolts and the limb lock. Make sure the limb lock teeth chamfers are facing the rear of the saw. Torque both limb lock bolts to 10 in-lbs. Step 4 Allow the saw to sit for 24 hours to let the pre-applied threadlocker fully set.