JDM Subaru Legacy Outback Climate Control Single Din Bezel 2005-2009

JDM Subaru Legacy 2005–2009 Outback Climate Control Single-DIN Bezel with Hazard Button Upgrade your Subaru Legacy or Outback interior with this authentic JDM Single-DIN climate control bezel, complete with hazard switch and stylish silver finish. This bezel allows you to cleanly mount an aftermarket Single-DIN head unit or pocket while integrating factory-style climate controls — a must-have for any clean JDM interior swap. Key Features: Genuine JDM Subaru Legacy/Outback center bezel (2005–2009) Single-DIN opening – perfect for classic single-DIN stereos, gauges, or pocket add-ons Integrated manual climate control and hazard button Silver finish – matches OEM JDM interior trim Direct fit for Right-Hand Drive JDM dashboards (modification may be required for LHD USDM cars) ⚠️ Compatibility Note (USDM Models): This bezel and integrated manual climate control system were designed for Right-Hand Drive (RHD) JDM vehicles. Installing this in a Left-Hand Drive (LHD) USDM vehicle will require a custom wiring harness or climate control adapter to function properly. Direct plug-and-play is not supported. Professional installation is highly recommended unless you're experienced with automotive electronics and climate system conversions. 🧰 ( Unofficial Installation GUIDE ) Required Parts & Tools Parts: (included) JDM Single-DIN bezel with integrated manual climate control and hazard switch --------------------------------------------------------------------------------------------------------------- (not included) i88 adapter harness (for climate control integration) (not included) 14-pin stereo adapter (for aftermarket head unit) (not included) Optional: i85 harness (for steering wheel controls, OEM navigation, or auxiliary input) Tools: Trim removal tools Phillips screwdriver Soldering iron or wire connectors Electrical tape or heat shrink tubing Wiring diagrams for both JDM and USDM climate control systems 🛠️ Installation Steps Disconnect the Battery: Always start by disconnecting the negative battery terminal to prevent electrical shorts or accidental airbag deployment. Remove OEM Bezel and Head Unit: Use trim removal tools to gently pry off the center bezel. Unscrew and unplug your current stereo and climate controls. Prepare the JDM Bezel: Carefully remove the climate control unit if needed and verify functionality before continuing. Wiring the Climate Controls: The JDM manual unit uses different wiring than the USDM digital system. Use a pinout diagram and a custom wiring harness or adapter like the i88 harness to connect corresponding functions (fan speed, temperature, etc.). Hazard Switch Wiring: The hazard button connector differs. You will likely need to re-pin or adapt the plug. Install the New Stereo (Optional): Mount your Single-DIN head unit using a compatible kit or pocket. Connect using a Subaru-to-ISO or aftermarket harness. Test Everything Before Final Assembly: Reconnect the battery. Test climate controls, hazard switch, and stereo. Ensure blower, A/C, and heat respond correctly. Secure and Reassemble: Once confirmed working, reattach everything and secure the bezel. Foam padding may be used to fill any fitment gaps. 🔗 Additional Resources LegacyGT Forum Thread – JDM HVAC Conversion Discussion Tight Fit Fabrication – i88 Plug-and-Play Harness AVO JDM – Dual-Zone AV Panel Set YouTube Video – JDM Double DIN/Single DIN Install Subaru Legacy 05-09 Condition: Used JDM import Fully functional unit May show light wear or surface marks from prior use NOTE: This is a used JDM product and may contain cosmetic defects. Please view item pictures carefully.