SEA WALL SEALER by TRIDENT (8409)

Sea Wall is a high-performance silane/siloxane blend that protects the surface from water penetration, salt & freeze/thaw damage. Its advanced reactive chemistry and EZ Nano Technology provides the ultimate in surface protection. Sea Wall is a solvent based invisible penetrating sealer. FEATURES ADVANCED REACTIVE CHEMISTRY AND EZ NANO TECHNOLOGY Provides ultimate surface protection against water and salt infiltration Prevents surface spalling caused by freeze/thaw environments SUPERIOR WATER REPELLENCY Inhibits biological growth such as mold, moss & algae HIGH PERFORMANCE SILANE/SILOXANE BLEND Does not contain any silicone or wax components BREATHABLE, IMMEDIATE APPLICATION Will not trap naturally occurring efflorescence and/or moisture Can be applied on a new, clean and dry surface without waiting* (see Surface Preparation in application instructions) EASY TO APPLY Applies easily on dry or damp surfaces Apply two coats wet-on-wet for optimal performance INVISIBLE PENETRATING SOLVSENT BASED SEALER Does not alter the appearance of the surface (some surfaces may darken slightly) Non-film forming Consistency of water and clear in appearance when applied. Dries transparent. TEMPERATURE STABLE Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C) IDEAL APPLICATIONS Driveways, Walk Ways/Stairs, Garage Floors, Industrial Flooring, Building Entrances, Shopping Malls, Restaurant Drive-Thrus, Dumpster Pads Any high use hardscape surface where protection from water and salt are important. SUITABLE SURFACES CONCRETE STAMPED CONCRETE CONCRETE WALL BLOCK CLAY PAVERS NATURAL STONE MANUFACTURED STONE TRAVERTINE EXPOSED AGGREGATE GROUT Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer. Do not use on asphalt. Performance may vary on limestone. Test first to verify performance and appearance before applying. PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance. COVERAGE PER GALLON PAVERS & OTHER HARDSCAPE SURFACES 75-200 square feet 7 - 18.6 square meters CONCRETE 100-200 square feet 9.3-18.6 square meters RETAINING WALLS & OTHER VERTICAL SURFACES 50-200 square feet 4.6-18.6 square meters Coverage based on two coats applied wet-on-wet at right angles to first coat. Use approximately two thirds of the estimated amount on the first coat and one third on the second ensuring saturation. Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature.