Actichem Percide 5L - RTU - Hospital-grade disinfectant

Percide Hospital-grade disinfectant - AUST L 332284 Percide is a hospital grade disinfectant that is TGA listed. It is also an advanced mould removal product. Actichem’s Percide (AP610) is an advanced peroxide based disinfectant for the eradication of mould and decontamination of infectious environments. Its unique formula penetrates deep into porous surfaces and reacts violently with mould spores & growth to entirely eradicate them. It also removes the mould stain and brightens the surface being treated. Percide does not encapsulate or hide mould, but eradicates its spore roots to ensure consistent, 100% clearance reports on every mould remediation job. Percide also displays incredible biocidal activity against bacteria and viruses. When evaluated against the Hospital Grade disinfection test and the AOAC Hard Surface Carrier test it achieves total microorganism elimination in only 60 seconds. Mould Percide’s unique peroxide formula, has several innovative design features to provide consistent, reliable results in mould remediation every time. It’s aggressive reaction with mould can be seen by the rapid fizzing when it contacts mould as it eradicates the mould spores and lifts the mould out of surface pores. Percide takes only 10 minutes to achieve a >4.5log reduction (kill) when tested against Aspergillus Brasiliensis. With a very favourable and economical RTU profile, Percide is a product of choice. Colour: Clear pH: 5.5 - 6 Fragrance: None Dilution: Ready to use Safety: Warning Pack Size: 5L Surfaces Carpet, Natural Stone, Upholstery, Ceramic & Porcelain, Concrete & Masonry, Plasterboard, Rubber, Timber, Vinyl Benefits Disinfects bio-contaminated surfaces. Kills mould and removes the staining. Advanced Peroxide Formula: Percide comprises a unique peroxide formula for incredible disinfection and mould eradication performance in a low-toxic, easy-to-use form. Penetration: To provide ultimate sanitisation of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the biocide to penetrate faster and deeper into the inner structure of the fibre and porous substrates. Cleaning and Destaining: Percide lifts mould from surface pores and provides incredible cleaning and destaining action on mould and bacterial discolouration. Eliminates odours: Percide eliminates odours at their source by powerful antimicrobial action against odour-causing germs. Environmentally Safe: Percide is inherently biodegradable and is a great, environmentally responsible choice. Safe for use in food environments. Directions for use Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use. Percide is safe for use on many synthetic carpets and fabrics; however, see notes regarding the use of Percide on carpet & fabric. It should also be noted that fibres destabilised by disaster activity could be affected Mixing No dilution necessary. For enhanced mould build-up removal and biocidal action, mix 9 parts Percide and 1 part Percide Boost (Use within 8 hours). Application Remove and clean away all wet and dry debris. Apply Percide solution to the affected area. Ensure all surfaces come into contact with Percide solution. Application can be by means of spray, wet fog, mop or cloth. See notes regarding wet fog application. Agitate briefly, where possible to promote penetration into porous substrates. Thorough agitation will dramatically aid mould and stain removal. Allow a minimum of 1 minute dwell time for disinfection and 10 minutes dwell time for mould remediation. Rinse thoroughly with clean water. Repeating this process may be required for heavy mould conditions. Note For heavy mould situations, mix Percide with Percide Boost for accelerated mould eradication and cleaning performance. Agitate thoroughly to achieve a perfect result. After cleaning and disinfection is completed, Percide can be applied as a post-residual treatment for enhanced inhibition of fresh mould growth.