Bitmain ANTRACK V2-EC4-DTHP | BT-MINERS

Bitmain ANTRACK V2-EC4-DTHP Please note that the current price for this product does not include shipping fees. After ordering, kindly contact your sales manager/Customer Service Robot or email (sales@bitmain.com) to confirm your shipping method and obtain the final shipping cost. Specifications Product Glance Value Model ANTRACK Version V2-EC4-DTHP Capacity 4 units ANTMINER (Hydro) or 4 units ANTMINER (U2 Hydro) or 2 units ANTMINER (U3 Hydro) Maximum load,kW 24 Detailed Characteristics Value Part 1: Mining Cabinet Hardware Configuration Size (Length*Width*Height), mm (without package) 1200*600*1300 Size (Length*Width*Height), mm (with package) 1460*1330*780 Net weight, kg (without package) 130 Gross weight, kg (with package) 185 Network connection mode RJ45 Ethernet 10/100M Power Supply Power supply AC Input voltage, Volt(1-1) 380~415V AC Power supply AC Input Frequency Range, Hz 50~60 Power supply AC Input current, Amp(1-2) 63 Water pump Rated power, W 450 Noise, dBA@1m 60 Lift, m 19 Size (Length*Width* Height), mm 360*210*268 Plate heat exchanger Maximum heat exchange power, kW 30 Size (Length*Width* Height), mm 305*106*64 Diameter of water pipe connector, mm DN20 Part 2: External Cooler(1-3) Hardware Configuration Size (Length*Width*Height), mm (without package) 1340*570*1330 Size (Length*Width*Height), mm (with package) 1490*590*1495 Net weight, kg (without package) 235 Gross weight, kg (with package) 248 Power supply Power supply AC input voltage, Volt(1-1) 380~415V AC Power supply AC input frequency range, Hz 50~60 Maximum power supply AC input current, Amp(1-2) 21 Heat pump Heating Capacity (typical), kW 32 Compressor Input (typical), kW 8 EER (typical) 3.0 Sound Level, Db(A) 50 Refrigerant R290 Heating water outlet temperature, °C 80 Fan Rated power, W 500 Noise, dBA@1m 50 Size (Length*Height*Thickness), mm 551*551*160 Water pump Rated power, W 180 Noise, dBA@1m 30 Size (Length*Width* Height), mm 130*551*129 Environment Requirements Ambient temperature, °C -20~40 Water flow, L/min 32.0~40.0 (Cabinet side) Water flow, L/min 32.0~40.0 (Heating side) Water pressure, bar ≤3.5 Working fluid(1-4) Organic Antifreeze (10%) Installation distance, m(1-5) 50 Liquid PH 7.8~8.5 Storage temperature, °C -20~70 Operation humidity(non-condensing), RH 10~90% Notes: (1-1) Caution: Wrong input voltage may probably cause miner damaged. (1-2) Three-phase AC input. (1-3) Please keep the ANTRACK’s ambient temperature between 15 °C and 45 °C. Maintain at least 1 m of clearance in front of and behind the unit, and ensure adequate room ventilation to prevent exhaust-air recirculation. Under normal operation, the miner’s inlet-water temperature will be about 5 °C above ambient. When operating with older models (e.g. S19 Hyd., T19 Hyd., S19 Pro Hyd., S19 Pro+ Hyd., T19 Pro Hyd., S19 XP Hyd.), ensure the ambient temperature does not exceed 35 °C. (1-4) If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time. PS: An ANTRACK unit features four rack slots, each equipped with one network cable and one power cable tailored for Hydro-cooling miners. The unit also includes a water pump, eight fans, a heat exchanger and a plate heat exchanger. For smooth operation of the ANTRACK system, please prepare the following additional items: • A three‑phase, five‑core 380–415 V AC power cable (6AWG) • An Ethernet cable • 20 L of 10 % antifreeze