SCC TRADITION Rear Guards (Softails Only)

The Steady Custom Cycles Tradition Rear Guards are produced like no other guards on the market! Built from large 1.25″ tubing for that fat and beefy look! These guards are intended for use on softails without saddlebags. For the ultimate styling package, be sure to purchase the matching Tradition Handlebars and Engine Guards as well! Only compatible with mufflers 2.25″ or smaller in diameter, anything larger than 2.25″ may touch the bag guards. If using extended side covers; the bag guards will not fit. NOT AVAILABLE FOR 2018 & UP SOFTAILS Only compatible with Heritage Classic, Heritage Springer, Softail Deluxe and some Softail Slim models. Not compatible with Fatboy Softails or Dyna models. Note: Like all our products, these set does not come with hardware. If you are looking to get the bag guards that are intended for use with extended saddlebags; please let look up "SCC 4" EXTENDED TRADITION BAG GUARDS” on our website's search bar. You can also find this on our drop down menu when you select the option for rear guards. Extended Bag Guards and Rails Warranty: All of our Guards and Bag Rails are warranted against defects in material and/or workmanship for a period of 90 days. This does NOT cover finishes such as plating, or painted surfaces with discoloration or rust. This warranty shall be limited to the repair or replacement of the part, which may be proven defective under normal use. We will not warranty any parts that has been abused, misused, improperly installed, modified, or damaged during impact (scape the ground, tool marks, accident, etc.). Disclaimer: Rear Guards and Bag Rails are ornamental/dress up products with no special functions. All Guards and Bag Rails are built to fit factory chassis/frame, if there are any modifications or damages done to the chassis, then fitment may not work due to the changes. For lowered motorcycle, such as fender clearance when suspension is compressed and swing arm clearance. The guards are intended for compatibility only with muffler pipes that are 2.5" in diameter or under. Rails require clearance in the back between the fender and the bags. If customer is using extended gap covers, the rails will not have clearance and therefore will not fit. SCC Rails were made for bags with a thin diameter and extended down. Not compatible with the down and out bags or fat after market bags. NOT available for 2018 and over softail. Product does not come with hardware. Steady Custom Cycles is not liable for any damages. Warranty not valid if parts are not installed by approved SCC Dealer.