Garrett GTX2867R Gen II Supercore 50mm (849894-5002S)

The Garrett GTX2867R Gen II supercore is a complete ball-bearing turbocharger supplied without a turbine housing, so you can pair it with the GT28R / GTX28R housing that suits your setup, or reuse the one you already have. The 50mm compressor wheel steps up from the GTX2860R for more top-end airflow, and Garrett rates it at 275–550 hp for engines from 1.4 to 2.5 litres. Gen II compressor wheel aerodynamics deliver up to 20% more power than the original GTX2867R, while a fully machined ported shroud improves surge resistance for crisp, responsive boost. Key features Gen II forged, fully machined compressor wheel aerodynamics 8 mm dual ceramic ball bearing cartridge, oil and water cooled Fully machined compressor inlet, outlet and ported shroud High-flow Gen II compressor housing Fully machined speed sensor port (plugged from factory), accepts the Garrett speed sensor kit, sold separately Outline-interchangeable with GT and GTX Gen I turbos, so it suits existing piping Compatible with all existing GT and GTX (GT28R / GTX28R) turbine housing kits Please note: turbine housing is not included. Product photos show the turbo with a housing fitted. Standard rotation. Maximum allowable shaft speed is 165,000 rpm. Specifications Garrett part number 849894-5002S Bearing system Dual ceramic ball bearing Cooling Oil and water Power rating 275 – 550 hp Engine displacement 1.4 – 2.5 L Compressor inducer / exducer 50 mm / 67 mm Turbine inducer / exducer 54 mm / 47 mm Frame GT28 / GTX28 Rotation Standard Max shaft speed 165,000 rpm Compatible Garrett turbine housings (sold separately) Part number A/R Inlet Outlet Wastegate 827690-0001 0.57 V-band V-band External (free float) 827690-0002 0.72 V-band V-band External (free float) 827690-0003 0.64 T25 5-bolt Internal 827690-0004 0.86 T25 5-bolt Internal All housings are single (undivided) entry. Garrett performance products are intended for off-road / motorsport use. Check compliance requirements before road use.