EYFLA7A10H IMPACT SCREW DRIVER

For å legge inn en bestilling, send en e-post til firmapost@morek.no 10.8V Mechanical Pulse Tool Driver EYFLA7A / EYFLA7AR Models EYFLA7A EYFLA7AR Voltage 10.8V Series AccuPulse - HR Series AccuPulse - HR Series with 2-Way Communication Drive A = 1/4” Hex Quick Change Torque Range Nm 3-22Nm ft. lbs. 2.2-16.2 ft. lbs. in. lbs. 26.55-194.72 in. lbs Max Torque* (F mode, tightening 3 sec.) 35Nm M10 Bolt Flush Detection Modes L1 - L7 No Load Speed (Torque Setting: RPM) 1: 0 – 950 2: 0 – 1250 3: 0 – 1450 4 - 8: 0 – 1550 9 - 40 & F: 0 – 2300 PPM (Pulses Per Min) 1: 0 – 1900 2: 0 – 2500 3: 0 – 2800 4-8: 0 – 3000 9-30 & F: 0 – 4000 Weight 1,15 kg (incl. 2.0 Ah (EYFB32B)) 1,35 kg (incl. 3.0 Ah (EYFB30B)) Size (L x W x H) 153mmx59mmx231mm (EYFB32) 153mmx59mmx249mm (EYFB30) Wireless Communication with Assembly Qualifier: — X LED Work Light: (ON/OFF Switch) X OK/NOK Light: (Green: OK / Red: NOK) X Rehit Prevention: (Possible to set per 0.1 sec. between 0-3 sec.) X Battery Indication Lamp: (3 stage) X Low Power Disable X Prevent / Detect Cross Threads & Rehits X Maintenance Interval Alarm X Variable Speed On / Off Switch X Variable Speed On / Off Switch X Buzzer: On / Off X Flush Point Detection Delay (Possible to set between 0-3 sec.. 0.1 sec. per stage) X Socket Extension Mode (h1:150mm socket, h2: for 250mm socket) X Work Capacity / Fastening Speed* <M6: 10 N·m, Stage: 22> (EYFB30B) 1200 pcs/pack 0.7 sec/1pcs (EYFB32B) 800 pcs/pack 0.7 sec/1pcs Charging Time* (Battery pack EYFB30B, Charger EY0L82B) Usable charge: 35 min., Full charge: 45 min (Battery Pack EYFB32B, Charger EY0L82B) Usable Charge: 35 min., Full Charge: 40 min Varen er på lager i Sverige, og lagerbeholdningen oppdateres ikke automatisk. Vi tar derfor forbehold om at varen kan være utsolgt. Hässleholm (Sverige): På lager (1)