AeroFrame AeroMono Doors

Product Description AeroMono creates a clean glass elevation with Salice Air hinges at the top and bottom of the door. Prepared top and bottom HingeBars provide the mounting system. Use 18 mm top and bottom cabinet panels that capture the side panels, and maintain the fixed perimeter and between-door gaps. Select from the shared frame finishes, AeroGlass options and six handle configurations. The Order Form assigns every physical door to a Group. AeroFrame prepares HingeBar lengths and hinge-hole positions from the submitted door information. Planning & ordering Check the cabinet requirements below, confirm your finishes against physical samples, then complete the latest series Order Form. A quotation is not a production approval. Product Features Door system Glass door with top-and-bottom hinges Hinge Salice Air soft-close Opening 105° Finished door width 250-600 mm Finished door height 300-2400 mm Door thickness 23.3 mm Cabinet panels 18 mm top and bottom panels Construction Top and bottom panels capture sides Perimeter / between doors 2 mm / 4 mm HingeBars One top + one bottom per Group Handles Six configurations, A-F Frame / panel options Eight finishes + shared AeroGlass Supplied With Made-to-order doors with two Salice Air hinges per door, plus one pre-drilled top and one pre-drilled bottom HingeBar per Group. Frame & Panel Options Choose a frame finish, then a panel option available for this series. Confirm colour and texture against physical samples. Frame Finishes Eight finishes shared by all three series Antique Bronze Powder-coated Champagne Powder-coated Iron Grey Powder-coated Jet Black Powder-coated Stone Grey Powder-coated Matte White Powder-coated Light Gold Baked paint Smoky Grey Baked paint AeroGlass Pure Pure Clear Smoked Grey Bronze Reflect Crystal Reflect Smoke Reflect Bronze Reflect Texture Frosted Wave Frosted Reed Selection reference only. Record your chosen names in the Order Form; images are not an online configurator. Hinge System & Cabinet Requirements Salice Air · concealed top-and-bottom mounting 105° soft-close Two hinges per door, mounted at the top and bottom. No intermediate side hinges. Prepared HingeBars One top and one bottom bar per Group. Bar lengths and hinge-hole positions are prepared by AeroFrame. Cabinet Construction The 18 mm top and bottom panels must capture the side panels. Mounting reference: 18 mm panel thickness and 46 mm HingeBar depth. Confirm the cabinet construction before ordering. Top & Bottom Clearance Outer & Between-Door Gaps Use the stated dimensions. Full installation and Group-entry instructions are in the AeroMono Order Form. Handle Options Six configurations, A–F. Gold identifies the handle position within the frame. OPTION A 180 mm / tall door 1600 ≤ H ≤ 2400 mm Handle bottom is 1000 mm above the door bottom. OPTION B 1180 mm Long Handle 2000 ≤ H ≤ 2400 mm Handle bottom is 15 mm above the door bottom. OPTION C Full-Length Handle 300 ≤ H ≤ 2400 mm 15 mm setback from both top and bottom. OPTION D 180 mm / top position 300 ≤ H ≤ 1600 mm Handle top is 15 mm below the door top. OPTION E 180 mm / bottom position 300 ≤ H ≤ 1600 mm Handle bottom is 15 mm above the door bottom. OPTION F No Handle 300 ≤ H ≤ 2400 mm No integrated handle. Confirm the opening method with your cabinet maker. H = finished door height. W = 250–600 mm. Use the stated dimensions and the AeroMono Order Form. FAQ Where can I find the complete guide and order details? Download the Design & Specification Guide for the collection overview. Use the AeroMono Order Form for final measurements, hardware details and the matching order table. Can I download documents without signing in? Yes. The brochure and Order Form are public downloads. The Price List is available to signed-in registered customers only. Where do I send my form, and what information is needed? Send your AeroMono form to your Sales Rep with your company and project / PO reference. For a first quote, include finished width, height, quantity and panel finish. No assigned rep? Email sales@knoxone.com.au. When is my custom order confirmed? A quotation is not an order. Complete and sign the final specification for Sales review. Processing is released after approval and full credit / payment coverage. Sales confirms the lead time; released custom specifications cannot be changed or cancelled.