Honeywell FS-SICC-0001/L24 System Interconnection Cable

The Honeywell FS-SICC-0001/L24, also cataloged as the FS-SICC-0001 System Interconnection Cable, operates as a dedicated hardware component for multi-channel signal routing between modules and Field Termination Assemblies (FTAs) within Honeywell Safety Manager architectures. Hardware Specifications Parameter Specification Model FS-SICC-0001/L24 Brand Honeywell Origin USA Weight Approx. 1 kg Dimensions Outer Diameter: 9.93 mm (0.39 in), Cable Length: 24 m Operating Temp -20 deg C to +85 deg C (-4 deg F to 185 deg F) Power Consumption Passive component (Voltage Rating: 300 V) Cable Type System Interconnection Cable Conductor Configuration 20 x AWG 22 (0.34 mm2), Copper Shielding Double shielded for EMI protection Impedance 120 ohms Termination Pre-terminated Honeywell-compatible connectors Standard Compliance RoHS compliant, UL listed 4-20 mA HART Loop Protocol and Channel-to-Channel Isolation The double-shielded construction of the FS-SICC-0001/L24 assembly preserves signal integrity across long runs between control racks and termination units. High channel-to-channel isolation is maintained along the 20-conductor bundle, suppressing crosstalk between adjacent telemetry pathways. This shielding architecture attenuates external electromagnetic interference (EMI), ensuring high-fidelity transmission of analog measurement signals and digital communication over 4-20 mA HART loop protocol connections. Frequently Asked Questions Q: What is the maximum voltage rating supported by the conductors in this cable assembly? A: The FS-SICC-0001/L24 conductors carry an absolute maximum continuous rating of 300 V. Q: Can this cable assembly be used in outdoor installations with high ambient temperature fluctuations? A: The thermoplastic isolation jacket supports continuous operational exposure from -20 deg C up to +85 deg C. Q: How does the cable construction prevent electromagnetic interference across signal pairs? A: The assembly incorporates double shielding along its full 24 m length with a 120 ohm characteristic impedance match. Field Installation Guidelines Observe the minimum static and dynamic bend radius limits corresponding to the 9.93 mm outer diameter during cable tray routing. Fasten pre-terminated connector locking mechanisms securely to FTA interface headers to prevent pin contact oxidation or vibration loosening. Verify shield continuity and ensure proper grounding at designated cabinet earth buses to avoid noise coupling and ground loops. Avoid running system interconnect cables in close parallel proximity to high-voltage AC power distribution conduits.