BWM 60W JPT MOPA Fiber Laser Engraver

Full MOPA Control at 60W — Color Marking, Deep Engraving and a Rotary Included, Delivered in About a Week The BWM 60W runs a JPT M7 (E) MOPA source with pulse width adjustable from 2 to 500 ns and 2.0 mJ of pulse energy. It ships complete with a rotary and two field lenses, air-freighted to your door for $4,290 with duties included. Compatible Materials: Metal Plastics Stone Leather Rubber Most shops shopping for a fiber laser hit the same trade-off: a budget Q-switched machine that can only make one shade of gray, or a MOPA machine that arrives by ocean freight a month or more after you pay. The BWM 60W JPT MOPA Fiber Laser Engraver removes both problems. It's built around the JPT M7 MOPA platform that production shops rely on for color and fine-detail work, and BWM ships it by FedEx air freight, so it typically reaches a US address in around 7 business days. It's a split-design galvo system: a compact control cabinet with carry handles, and a marking tower with an aluminum work table. Nothing to assemble beyond connecting cables, and nothing to add before your first job, because the rotary and a second lens are already in the box. Why the JPT M7 (E) Source Matters at 60W JPT, the company that makes the laser source, builds its M7 MOPA sources in several internal grades. BWM specifies the (E) grade for this machine and advises against the cheaper E2 grade, which it considers to have a higher failure rate. The difference sits in the components you can't see: the seed and pump diodes. The (E) grade is built for more stable output over long daily run times, so the color or depth you dial in on Monday still matches on Friday. On paper, the 60W source delivers 2.0 mJ maximum pulse energy, beam quality of M² below 1.5, and a 7.0 mm output beam. That pulse energy is higher than JPT's 100W M7 source (1.5 mJ), which is why 60W is a common starting point for shops that want strong marking and engraving performance without paying 100W prices. 2 to 500 Nanosecond Pulse Control: How MOPA Makes Color on Steel A standard Q-switched fiber laser fires at a fixed pulse width, so it can mark metal but can't control how the surface oxidizes. A MOPA source lets you set pulse width independently from frequency (1 to 4,000 kHz). That independent control is what produces repeatable color marking on stainless steel and titanium: golds, blues, purples and reds created by building a controlled oxide layer, not by ink. The same control helps elsewhere. Short pulses remove the dye layer of anodized aluminum cleanly for crisp black or bright-white marks, and give sharper edges on plastics that would melt or bubble under long pulses. Long pulses at high power drive heat into the part for deep engraving on tool steel, coins and knife blanks. Rotary Attachment and Two Lenses Included — Not Upsold Many fiber listings advertise a low price and then add the rotary and second lens at checkout. BWM includes one rotary attachment and two field lenses with the 60W at the listed price. The rotary lets you engrave tumblers, pens, rings, flashlights and firearm parts right out of the box. Two lenses mean you can switch between a smaller, tighter field for fine detail and a larger field for bigger parts or batch layouts, instead of compromising on one lens for everything. The standard marking area is 110 x 110 mm, and BWM offers optional lenses up to 300 x 300 mm for larger plates and panels. Manual Lift Tower with Dual Red-Light Focusing The marking head rides on a handwheel-driven lift column, so you can raise it for tall parts or the rotary and lower it for flat stock in seconds. The galvo head uses dual red-light pointers: bring the two dots together and you're at focal height, with no guesswork or ruler needed. The red preview laser is coaxial with the marking beam, so the outline you frame is exactly where the laser will fire, which cuts setup time and wasted parts. For flat parts, the aluminum work table is drilled for fixtures and hold-downs, so repeat jobs line up the same way every time. Choosing Your Lens Sizes The field lens sets how large an area the galvo head can mark in a single pass, and it's a trade against fine detail: a smaller lens concentrates the beam into a tighter spot for crisp small text and jewelry-scale marks, while a larger lens trades some of that resolution for a bigger single-pass work area — useful for logos, large data plates or laying out several parts in one job. BWM offers four field lens sizes for the 60W: 100 x 100 mm, 150 x 150 mm, 200 x 200 mm and 300 x 300 mm. Every BWM 60W ships with two lenses of your choice from that range at no extra cost — a common pairing is a smaller lens for fine detail and a larger one for bigger parts, so you're not stuck compromising on a single field size. The machine also ships standard with a D80 rotary attachment for engraving round items such as tumblers, bottles, pens and rings. It swaps in for the flat work table using the same fixture bars, and the dual red-light focus makes re-centering fast. 7,000 mm/s Galvo Speed and ±0.006 mm Repeatability A galvo laser doesn't drag a head across a gantry the way a CO2 or diode machine does. Two mirrors steer the beam at up to 7,000 mm/s, so a business card logo or serial number takes seconds, not minutes. BWM rates repeatability at ±0.006 mm and minimum line width at 0.015 mm, which is fine enough for micro-text on jewelry, UDI-style part marks, and QR codes that still scan after polishing. EZCAD2 Included, LightBurn Compatible The machine runs on a JCZ control card with EZCAD2, the industry-standard galvo software for Windows. It's also compatible with LightBurn, which many of our customers prefer for its cleaner interface, its layer-based workflow and native Mac support. LightBurn exposes the MOPA pulse-width and frequency settings you need for color work. A LightBurn galvo license is sold separately by LightBurn. Air-Cooled, 110V and Built for a Small Shop Footprint The 60W source is air-cooled, so there's no water chiller to buy, fill or maintain. It runs on a standard 110V / 60Hz outlet and draws under 800W. The rated source lifespan is 100,000 hours. The control cabinet carries an emergency stop plus separate key switches for the scan head and the laser source, and BWM states that its machines comply with FDA and CE standards. Who the BWM 60W Is Built For Custom product and gift businesses engraving tumblers, pens, keychains and jewelry, with color marking as an upsell Jewelers and permanent jewelry studios that need fine, clean detail on gold, silver and stainless Firearm and knife makers marking serials, logos and compliance text Machine shops and manufacturers adding part numbers, QR codes and data plates in-house Schools and makerspaces that want a metal-capable laser without a chiller or 220V circuit What the 60W isn't for: fiber wavelength (1064 nm) doesn't engrave clear glass, most wood, fabric or clear acrylic well. If those are your main materials, look at a CO2 or UV laser instead. What's in the Box BWM-60F marking tower with JPT M7 (E) 60W MOPA laser source and galvo scan head Control cabinet with emergency stop and key switches D80 rotary attachment Your choice of two field lenses (100 x 100, 150 x 150, 200 x 200 or 300 x 300 mm) JCZ control card with EZCAD2 software Power and connection cables Specifications Parameter Value Model BWM-60F Laser Source JPT M7 (E) MOPA fiber, 60W Average Output Power 60W Maximum Pulse Energy 2.0 mJ Beam Quality (M²) Less than 1.5 Laser Type MOPA pulsed fiber laser Central Wavelength 1064 nm Pulse Width Range 2 to 500 ns (adjustable) Pulse Repetition Rate 1 to 4,000 kHz Output Power Adjustment 10% to 100%, continuously adjustable Output Beam Diameter 7.0 mm (±1.0 mm) Max Marking Speed 7,000 mm/s Standard Marking Area 110 x 110 mm (optional lenses up to 300 x 300 mm) Included Lenses Two field lenses, sizes of your choice Included Rotary Yes, D80 rotary attachment included Galvo Scan Head High-speed digital galvo with dual red-light focus and positioning Controller / Software JCZ control card with EZCAD2; LightBurn compatible Operating System Windows 7 / 10 / 11 (Mac via LightBurn) Cooling Air-cooled (no chiller required) Input Power 110V / 60Hz single-phase (220V available) Power Consumption Under 800W Operating Temperature 0 to 40°C Rated Laser Source Lifespan 100,000 hours Safety Emergency stop, separate scan head and laser key switches; manufacturer states FDA and CE compliance Package Size 77 x 47 x 77 cm (30.3 x 18.5 x 30.3 in) Warranty 3 Years, complete machine Repeatability ±0.006 mm Minimum Line Width 0.015 mm Z-Axis Manual handwheel lift Net / Gross Weight 50 kg / 60 kg (110 / 132 lbs) Warranty and Support BWM covers the complete machine, including the JPT laser source, for 3 years, with lifetime technical support from its engineering team. Warranty parts ship directly from BWM, and if something has to be repaired, BWM pays freight both ways. BWM has been building fiber lasers for around 20 years. The Maker's Chest Difference 🇺🇸 US-based pre-sale guidance — we sell fiber and UV lasers to small businesses, schools and universities every week, and we'll tell you plainly whether this machine, a different wattage, or a different laser type fits the materials and volumes you actually run. 🛠️ Two layers of support — our US team for day-to-day questions, backed by BWM's own engineers for remote diagnostics by phone, video or TeamViewer, with lifetime technical support after the warranty ends. ✈️ Fast, all-in delivery — shipped by FedEx air freight, typically arriving in around 7 business days, with duties, taxes and customs fees already included in the price. No broker invoices after delivery. 🧾 3-year complete-machine warranty — replacement parts ship directly from BWM, and the manufacturer covers two-way freight if a component needs repair. 🧰 Everything you need to start marking is included — the rotary and two lenses are in the box at $4,290, so the price you compare is the price you pay. 🎨 Setup and parameter help — we'll point you to starting settings for color marking, anodized aluminum and deep engraving, and help you choose between EZCAD2 and LightBurn. BWM 60W vs. 100W: Which Should You Choose? BWM 60W JPT MOPA BWM 100W JPT MOPA Laser source JPT M7 (E) MOPA, 60W JPT M7 (E) MOPA, 100W Max pulse energy 2.0 mJ 1.5 mJ Pulse width / frequency 2–500 ns / 1–4,000 kHz 2–500 ns / 1–4,000 kHz Z-axis Manual handwheel lift Motorized lift with up/down buttons Best at Color marking, fine detail, jewelry, tumblers, serial plates Faster deep engraving, larger batch jobs, thin metal cutting Net weight 50 kg (110 lbs) 60 kg (132 lbs) Price (delivered) $4,290 $5,390 Choose the 60W if your work is mostly color marking, jewelry, tumblers and fine detail, and you want the higher 2.0 mJ pulse energy at the lower price. Choose the 100W if deep engraving, large-area jobs or batch production take up most of your day, and you'd like a motorized Z-axis. Frequently Asked Questions about the BWM 60W JPT MOPA Fiber Laser Q: What's the difference between the BWM 60W and the BWM 100W MOPA fiber laser? A: Both use JPT M7 (E) MOPA sources with the same 2–500 ns pulse width and 1–4,000 kHz frequency range, and both include a rotary and two lenses. The 100W puts out more average power, so it removes material faster on deep engraving and large fills, and it adds a motorized Z-axis. The 60W actually has higher maximum pulse energy (2.0 mJ vs. 1.5 mJ) and costs $1,100 less, which makes it the better value for color marking and detail work. Q: Can the BWM 60W do color marking on stainless steel? A: Yes. Because it's a MOPA laser, you can set pulse width and frequency independently, which is what creates repeatable oxide colors on stainless steel and titanium. Expect to spend some time building a color library for your specific material, since alloy and surface finish change the result. Q: What materials can a 60W fiber laser engrave? A: It marks and engraves bare metals (stainless steel, carbon steel, aluminum, brass, copper, gold, silver, titanium), anodized and coated metals, many plastics (ABS, nylon, PVC, PET and opaque acrylic), stone, leather and rubber. It isn't a good choice for clear glass, fabric, most wood or clear acrylic. Q: How deep can the 60W engrave, and can it cut metal? A: BWM rates marking depth at up to about 1.0 mm, with depth depending on material and the number of passes. It can cut very thin metal such as foil-gauge brass or stainless for small jewelry blanks, but it isn't a sheet-metal cutter. Q: Is the rotary really included? A: Yes. BWM includes one rotary attachment and two field lenses with the 60W at the listed price, so you can engrave tumblers, pens and rings from day one. Q: Does it work with LightBurn? A: Yes. It ships with EZCAD2 on a JCZ control card and is compatible with LightBurn's galvo module, including MOPA pulse-width control. LightBurn's galvo license is purchased separately. Avoid installing EZCAD2 and LightBurn drivers on the same computer, because the two can conflict. Uninstall one before switching to the other. Q: Do I need a chiller or a 220V outlet? A: No. The 60W source is air-cooled and the machine runs on a standard 110V / 60Hz outlet, drawing under 800W. Q: How long does shipping take, and are there import fees? A: BWM ships by FedEx air freight, typically arriving in around 7 business days. Duties, taxes and customs fees are included in the price, so there's nothing extra to pay on delivery. Q: What does the warranty cover? A: BWM provides a 3-year warranty on the complete machine, including the JPT source, plus lifetime technical support by phone, video or TeamViewer. Replacement parts ship directly, and BWM covers two-way shipping if a part needs repair. Q: Can I return the BWM 60W? A: BWM machines aren't covered by our standard return policy because they ship directly from the manufacturer by international air freight. If the machine arrives with serious shipping damage, BWM covers the freight both ways to repair or replace it. We're happy to answer every question before you order. Q: What lens sizes can I choose, and how many do I get? A: The 60W ships with two field lenses, and you choose their sizes from four options: 100 x 100 mm, 150 x 150 mm, 200 x 200 mm or 300 x 300 mm. A popular combination is a smaller lens for fine detail and jewelry work plus a larger lens for bigger parts or batch layouts. Tell us your typical part sizes when ordering and we'll help you pick. Q: Does the machine come with a rotary attachment? A: Yes. Every BWM 60W ships standard with a D80 rotary attachment, so round items such as tumblers, pens, rings and flashlights can be engraved without buying a separate accessory. Q: Why buy the BWM 60W from The Maker's Chest instead of directly from BWM? A: You get the same factory-direct air shipping and 3-year warranty, plus a US-based team for pre-sale advice, setup questions and a point of contact if anything comes up, all in US business hours. Specifications BWM 60W JPT MOPA Fiber Laser Engraver Specifications: Parameter Value Model BWM-60F Laser Source JPT M7 (E) MOPA fiber, 60W Average Output Power 60W Maximum Pulse Energy 2.0 mJ Beam Quality (M²) Less than 1.5 Laser Type MOPA pulsed fiber laser Central Wavelength 1064 nm Pulse Width Range 2 to 500 ns (adjustable) Pulse Repetition Rate 1 to 4,000 kHz Output Power Adjustment 10% to 100%, continuously adjustable Output Beam Diameter 7.0 mm (±1.0 mm) Max Marking Speed 7,000 mm/s Standard Marking Area 110 x 110 mm (optional lenses up to 300 x 300 mm) Included Lenses Two field lenses, sizes of your choice Included Rotary Yes, D80 rotary attachment included Galvo Scan Head High-speed digital galvo with dual red-light focus and positioning Controller / Software JCZ control card with EZCAD2; LightBurn compatible Operating System Windows 7 / 10 / 11 (Mac via LightBurn) Cooling Air-cooled (no chiller required) Input Power 110V / 60Hz single-phase (220V available) Power Consumption Under 800W Operating Temperature 0 to 40°C Rated Laser Source Lifespan 100,000 hours Safety Emergency stop, separate scan head and laser key switches; manufacturer states FDA and CE compliance Package Size 77 x 47 x 77 cm (30.3 x 18.5 x 30.3 in) Warranty 3 Years, complete machine Repeatability ±0.006 mm Minimum Line Width 0.015 mm Z-Axis Manual handwheel lift Net / Gross Weight 50 kg / 60 kg (110 / 132 lbs) Warranty BWM 60W JPT MOPA Fiber Laser Engraver Warranty Details: The BWM 60W JPT MOPA Fiber Laser Engraver is covered by a 3-year manufacturer warranty on the complete machine, including the JPT laser source, galvo scan head and control electronics (consumables and shipping damage claims handled separately). Lifetime technical support from BWM's engineering team by phone, video call or TeamViewer remote session, with most issues addressed within 24 hours. If a part fails under warranty, BWM ships the replacement directly; if a component has to go back for repair, BWM covers shipping in both directions. US-based pre-sale and post-sale help from The Maker's Chest team. BWM machines are not eligible for The Maker's Chest standard return policy because each unit ships directly from the manufacturer by international air freight. If your machine arrives with serious shipping damage, BWM covers freight both ways to repair or replace it. Please contact us before ordering with any questions so you're confident the machine fits your work.