Sunsynk Acure 8kW Single-Phase Hybrid Inverter – SunC2-8.0LV01

Sunsynk Acure 8kW Single-Phase Hybrid Inverter The Sunsynk Acure SunC2-8.0LV01(W/B) is an 8kW single-phase hybrid inverter designed to combine solar PV, battery storage and grid power in one intelligent energy system. Datasheet (2)(1) The inverter works with 40–60V battery systems and supports both lithium-ion and lead-acid batteries. When using a compatible lithium battery, charging can automatically adapt to information supplied by the battery’s BMS. Datasheet (2)(1) With substantial PV input capability, two MPPT trackers, high battery current and strong off-grid surge performance, the Acure 8kW is suitable for homes and businesses requiring reliable backup and efficient solar-energy management. Key Features 8kW rated single-phase hybrid inverter Model: SunC2-8.0LV01(W/B) 40–60V low-voltage battery system Compatible with lithium-ion and lead-acid batteries 190A maximum battery charging current 190A maximum battery discharging current Up to 16,000W maximum PV access power Up to 12,800W maximum PV input power 2 MPPT trackers Supports 2 + 2 PV strings Maximum PV input voltage: 500V MPPT voltage range: 150–425V 8,000W rated AC output 8,800VA maximum apparent power Off-grid peak power of 2 × rated power for 10 seconds Up to 50A continuous AC passthrough Maximum efficiency: 97.6% MPPT efficiency: >99% LCD + LED display RS485 / RS232 / CAN communication Wi-Fi / Bluetooth monitoring capability IP65 protection NRS 097-2-1 compliant according to the supplied datasheet The electrical ratings above are taken from the 8kW column of the manufacturer’s specification table. Datasheet (2)(1) Battery Specifications Battery Type: Lead-acid or Lithium-ion Battery Voltage Range: 40–60V Maximum Charging Current: 190A Maximum Discharging Current: 190A Lithium Battery Charging Strategy: Self-adaption to BMS Number of Battery Inputs: 1 Datasheet (2)(1) The high 190A charge and discharge capability makes the Acure 8kW suitable for compatible high-power low-voltage lithium battery systems. Solar PV Input Specifications Maximum PV Access Power: 16,000W Maximum PV Input Power: 12,800W Maximum PV Input Voltage: 500V Start-Up Voltage: 125V MPPT Voltage Range: 150–425V Rated PV Input Voltage: 370V Maximum PV Operating Current: 32A + 32A Maximum PV Short-Circuit Current: 48A + 48A Number of MPPT Trackers: 2 Strings per MPPT: 2 + 2 Datasheet (2)(1) This dual-MPPT configuration provides flexibility when designing solar arrays across different roof orientations or PV strings. AC Input & Output Specifications Rated AC Input / Output Active Power: 8,000W Maximum AC Input / Output Apparent Power: 8,800VA Peak Off-Grid Power: 2 × rated power for 10 seconds Rated AC Input / Output Current: 36.4A / 34.8A Maximum AC Input / Output Current: 40A / 38.3A Maximum Continuous AC Passthrough: 50A Rated Voltage: 220V / 230V Grid Connection: L + N + PE Grid Frequency: 50Hz / 60Hz Power Factor Adjustment: 0.8 leading to 0.8 lagging THDi: <3% at nominal power Datasheet (2)(1) High Off-Grid Surge Capability The Sunsynk Acure 8kW can provide peak off-grid output of twice its rated power for up to 10 seconds, according to the manufacturer’s datasheet. Datasheet (2)(1) This can assist with short-duration starting loads such as pumps, motors and other equipment with higher initial power demand, provided the complete battery and electrical system is correctly designed. Efficiency Maximum Efficiency: 97.6% Euro Efficiency: 96.5% MPPT Efficiency: >99% Datasheet (2)(1) Integrated Protection The Acure includes a comprehensive range of integrated protection functions, including: DC polarity reverse protection AC output overcurrent protection Thermal protection AC output overvoltage protection AC output short-circuit protection DC component monitoring Ground-fault current monitoring Islanding protection monitoring Earth-fault detection DC input switch DC terminal insulation impedance monitoring Residual-current detection Type II DC surge protection Type II AC surge protection Optional arc-fault circuit interrupter These protections are listed in the manufacturer’s datasheet. Datasheet (2)(1) Monitoring & Communication The Sunsynk Acure provides: LCD + LED display RS485 RS232 CAN communication GPRS monitoring Wi-Fi monitoring Bluetooth Optional 4G / LAN configurations Availability of individual monitoring options may depend on the supplied configuration and accessories. Datasheet (2)(1) General Specifications Operating Temperature: -40°C to +60°C Derating: Above 45°C Permissible Humidity: 0–100% Maximum Altitude: 2,000m Noise Level: <30dB Ingress Protection: IP65 Inverter Topology: Non-isolated Cooling: Intelligent air cooling Dimensions 366 × 630 × 281.41mm (excluding connectors and brackets) Weight 27.1kg Datasheet (2)(1) Grid Compliance According to the supplied Sunsynk datasheet, the Acure range lists compliance with: NRS 097-2-1 G98 / G99 EN 50549-1 Safety and EMC standards listed include IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1 and IEC/EN 62109-2. Datasheet (2)(1) Warranty Standard Warranty: 5 Years Warranty when installed with a Sunsynk battery: 10 Years Warranty remains subject to Sunsynk’s applicable warranty conditions and installation requirements. Datasheet (2)(1) Ideal For The Sunsynk Acure 8kW is suitable for: Residential solar systems Home backup installations Hybrid solar systems Small businesses Offices Shops Farms Guest houses Workshops Solar self-consumption installations Systems requiring high battery charge and discharge capability What’s Included 1 × Sunsynk Acure 8kW Single-Phase Hybrid Inverter Manufacturer-supplied accessories as applicable Manufacturer documentation