Drywall Screw Anchor

3D print your own drywall anchors for less than 5 cents each! Designed to work best with #6 x 2" (5.08cm) drywall screws. Print with 100% infill. How to use: 1. Pre-drill a 10mm (25/64" preferred or 3/8" will work) hole in drywall. 2. Press fit anchor into wall until flush 3. Use #6 coarse threaded drywall screws (2" length) https://amzn.to/3Udc7MQ Specifications: 3DPA rated up to 12.5kg or 27lbs (Ultimate Strength Safety Factor = 4.0) (Yield Strength Safety Factor = 2.4) See it in action: Strength test: *use at your own risk.*